View M220Z1-L03_828899.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e tft lcd t e nt ative s p ecification model no.: M220Z1-L03 c u s t o m e r : a p p r o v e d b y : note : liquid cryst al display divis ion qra divis ion. oa head division. a p p r o v a l a p p r o v a l 1 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e - contents - revisi on hist or y -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - 3 1. gene ra l desc rip t ion -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - 4 1.1 over view 1.2 fea t ures 1.3 appli c a t ion 1.4 general specifica t ions 1.5 mechanical specifica t ions 2. absol u te ma x i mum ra tings -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - 5 2.1 absolute ra ti ngs of environme n t 2.2 electrical absolute ra tings 2.2.1 tft lcd mo dule 2.2.2 backlight unit 3. electri c al characteri stics -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - 7 3.1 tft lcd module 3.2 backlight unit 4. block diagram -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - 11 4.1 tft lcd module 4.2 backlight unit 5. input termi n al p i n assi gnment -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - 12 5.1 tft l c d mo dule 5.2 backlight unit 5.3 color da t a input assignment 6. interf ace timing -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - 15 6.1 inp u t signal timing specifica t ions 6.2 power on/off sequence 7. optica l char a ct eristics -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - 17 7.1 test co nditio n s 7.2 optical specifica t ions 8. p a ckagi n g -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - 20 8.1 p a cking specifica t ions 8.2 p a cking metho d 9. definiti on of labels -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - 2 3 9.1 cmo module label 1 0 . p r e c a u t i o n s - --- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - 2 4 10.1 assembl y and ha ndling p r ecautions 10.2 safety precautions 1 1 . me cha nical c h a r acte ris t ics -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - 25 2 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e revision hist or y v e r s i o n d a t e s e c t i o n des c ription v e r 0.0 aug,31 ?06 all m220z 1-l03 s pecifi c ation s was first issu ed ?c 3 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e 1. general description 1.1 over vi ew the m220 z1-l 03 mo de l is a 22 inch wide tf t - lcd mod u le wit h a 4-ccf l backlight uni t and a 30-p i n 2ch - l v ds interfa c e. this modul e sup p o rt s 1680 x 1050 wsxga + (16:10 wid e scre en) mo d e and displ a ys up to 16.7 mil lions colo rs. the inverte r modul e for the backlight unit is not built in. 1.2 fea t ures - supe r wid e viewing a ngle - hig h co ntra st ratio - fast r e s pon se t i me - hig h col o r s a turatio n (ebu lik e s p e c ification s ) - wsxga + (1 680 x 1050 pi xels) resoluti on - de (dat a e nable ) only m ode - l v ds (lo w v o lt age dif f erential signali ng) inte rface 1.3 applica t ion - w o rkst atio n & desktop mo nitor - di splay terminal s for a v appli c ation 1.4 general specifi ca ti0ns i t e m s pecifi c a t i o n u n i t n o t e diag onal size 558.68 mm active area 473.76x2 96.1 mm bezel o peni n g area 477.7 (h) x 3 00.1 (v) mm (1) driver element a-si tft ac tive matrix - - pixel numbe r 1680 x r.g . b . x 1050 pixel - pixel pitch 0.282 (h) x 0.282 (v) mm - pix e l arran g e m ent rgb v e rtic al strip e - - display col o rs 16.7 millions color - t r a n smi s sive mode no rmally whi t e - - surface t r eat ment ha rd coating (3 h), ag (ha z e 25% ) - - 1.5 mechanical specifica t i o ns i t e m m i n . t y p . m a x . u n i t n o t e ho rizont al ( h ) 4 9 3 . 2 4 9 3 . 7 4 9 4 . 2 m m v e r t i c a l ( v ) 3 1 9 . 6 3 2 0 . 1 3 2 0 . 6 m m modul e size depth ( d ) 1 6 1 6 . 5 1 7 m m (1) w e ig h t 2 9 0 0 g i/f conne ctor mountin g positio n the mou n ting inclinatio n of the con n e c tor make s the scre en ce nter withi n 0 .5 mm as the hori z o n t a l. note (1) please refe r to the att a ch e d dra w in gs fo r mo re inform ation of front and ba ck outl i ne dime nsi o ns. 4 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e 2. absolute maximum ra tings 2.1 absol u te ra tings of env i ronme n t v a lue i t e m s y m b o l m i n . m a x . u n i t n o t e s t orage t e m perature t st - 2 0 + 6 0 o c ( 1 ) ope r ating am bient t e mpe r ature t op 0 + 5 0 o c ( 1 ) , ( 2 ) shock (non -ope rating ) s nop - 5 0 g ( 3 ) , ( 5 ) v i bration (no n -o perating ) v nop - 1 g ( 4 ) , ( 5 ) lc d cell life t i me l cell 5 0 , 0 0 0 - h r s mtbf based note (1) t e mperature and relative h u midity rang e is sho w n in t he figure belo w . (a) 9 0 % r h max . (t a ?? 40 oc). (b) w e t-bulb t e mpe r atu r e should b e 39 o c max. (t a > 40 oc). ( c ) n o c o nd en s a tion . note (2) the tempe r at ure of p anel surfa c e shoul d be 0 oc min. and 60 o c ma x. 90 20 10 60 40 80 -40 4 0 - 2 0 2 0 0 60 80 100 t e mperature (oc) operating range relative humidity ( % r h ) s t orage range note (3) 1 1 ms , half-s i ne wave, 1 time for x, y , z. note (4) 10 ~ 30 0 hz, sweep rate 1 0 min / cycle , 30 min for x,y , z axis note (5) upo n the v i bration an d shock test s, the fi xture use d to hold the module must be firm and rigid enou gh to prevent the mo dule from twi s ting o r ben di ng by the fixture. 5 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e 2.2 elect r ical absolute ra t i ngs 2.2.1 tft l cd modul e v a lue i t e m s y m b o l m i n . m a x . u n i t n o t e powe r suppl y v o lt age vcc -0.3 +5.5 v logi c input v o lt age v in - 0 . 3 + 4 . 3 v (1) 2.2.2 backlight unit v a lue i t e m s y m b o l m i n . m a x . u n i t n o t e lamp v o lt age v l - 2 . 5 k v rm s (1), ( 2 ), i l = 7.0 ma lamp curre n t i l 3 . 0 8 . 0 ma rms lamp f r eq ue ncy f l 4 0 8 0 k h z (1), ( 2 ) n o te (1) perma nent d a mag e might occur if the modul e is op erate d at con d itions ex cee d ing the maxi mum values. note (2) s p e c ified values a r e for lam p (refer to 3.2 for further info rmation). 6 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e 3. electrical cha ract eris tics 3 . 1 t f t l c d m o d u l e t a = 2 5 2 o c v a lue param e t e r s y mbol m i n . t y p . m a x . u n i t n o t e powe r suppl y v o lt age vcc 4.5 5.0 5.5 v - rippl e v o lt ag e v rp - - - 1 0 0 m v - ru sh current i rush - - - 3 a ( 2 ) w h i t e - 6 3 0 8 1 9 m a ( 3 ) a b l a c k - 1 1 7 0 1 5 2 1 m a ( 3 ) b powe r suppl y current f v = 75hz, vcc=4.5v lcc - - 1 3 3 0 m a ( 4 ) l v ds dif f eren tial input volt age v i d -10 0 - +10 0 mv l v ds commo n input volt ag e v i c -- 1.2 -- v note (1) the mod u le is re comm en ded to ope ra te within sp e c ificatio n ran ges li sted ab ove for norm a l function. note (2) mea s ureme n t conditio n s: +5.0 v ( l cd mo dul e in put) fus e 1uf c3 0.01uf c2 47k vr1 1k r2 2sk 147 0 vc c 1uf c1 q2 +12 v (hi g h t o l o w ) ( c ontr o l s i gn al) r1 47k q1 2sk 147 5 sw vcc rising time is 470 s 0.1vcc 0.9vcc gnd +5. 0 v 470 s 7 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e note (3) the sp ecifie d powe r sup p l y curre nt is unde r the con d itions at vcc = 5.0 v , t a = 25 2 oc, f v = 60 hz, whe r ea s a power di ssi p ation che c k p a ttern belo w is displ a yed. b. blac k pattern a. white pattern ac tive area ac tive area note (4) the sp ecifie d powe r sup p l y curre nt is unde r the con d itions at vcc = 4.5 v , t a = 25 2 oc, f v = 75 hz, whe r ea s a power di ssi p ation che c k p a tte rn (bla ck pattern ) bel ow is di spl a yed. black pattern ac tive area 8 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e 3.2 backli g ht unit v a lue param e t e r s y m b o l m i n . t y p . m a x . u n i t n o t e lamp inp u t v o lt age v l 7 3 8 8 2 0 9 0 2 v rm s i l = (7.0) ma lamp curre n t i l 3 7 . 0 8 ma rms ( 1 ) - - 1560 (2 5 c) v rm s ( 2 ) lamp t u rn o n v o lt age v s - - 1800 (0 c ) v rm s ( 2 ) ope r ating f r eque ncy f l 4 0 6 0 8 0 k h z ( 3 ) lamp life t i me l bl 5 0 0 0 0 - h r s (5) i l = (7.0 ) ma powe r co nsu m ption p l - 2 2 . 9 6 - w (4), i l = (7.0 ) ma note (1) lamp current is measured by utilizing hi gh-frequency current meters as shown below: t a = 25 2 oc 2 hv (pin k) l v (w hite) a 1 2 hv (blue ) l v (bla ck ) a 1 inverter lcd module cu rre nt mete r yokoga w a 2016 a note (2) the voltag e that mu st be l a rg er tha n v s shoul d be applie d to th e lamp fo r m o re th an 1 se con d after startu p. otherwi se, the lamp may n o t be turne d on no rmally. note (3) the lamp fre quen cy may pro d u c e interf ere n ce with hori z ont al synchro n ization freque ncy from the displ a y , which might cause line flow on the displa y . in order to avoid interfere n ce, the lamp frequ en cy sh ould b e det a c he d from th e hori z o n t a l synchroni zati on freq uen cy and it s ha rm onics as far as poss ible. n o te (4) p l = i l ?? v l x 4c cfl s note (5) the lifetime of lamp can be defin ed a s the time in whi c h it co ntinue s to o perate und er the con d ition t a = 25 ? 2 o c a nd i l = 7 marms until on e of the followin g event s o ccurs: (a) whe n the bri ghtne ss b e co mes o r lower than 50% of it s ori g inal valu e. (b) whe n the ef fective ignition length beco m es or lower than 80% of it s original value. (ef f ective ignition lengt h is defined as an area that has le ss than 70% brightn e ss co mp a r ed to the brig htne ss in the cente r poi nt.) note (6) the wavefo rm of the volt age output of in verter must be area-symmetri c and the desig n of the inverter mu st have spe c ification s for the modul a r ize d lamp. the perfo rma n ce of the backli ght, su ch a s lifetime or b r ig htn e ss, is greatl y influenc ed by the cha r a c teri stics of the dc-a c in verter for the lamp. all the p a ra m e ters of an in verter shoul d be ca refully d e sig ned to av oid produ cin g too much current leakage fro m high volt a ge outp u t of the inverte r . whe n de sig n i ng o r o r de rin g the inverter ple a se ma ke su re that a po or li ghting ca use d by the mi smatch of the backlight a n d the inverter (miss-lightin g, flicker , etc.) neve r occu rs. if th e above si tua t ion is confi r med, the module sho u ld be o p e rate d in the sam e mann ers wh en it is in st alle d in you r instrume nt. 9 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e the outp u t of the inverter must have symmetri c al (n e gative and po sitive) volt ag e waveform a n d s y mmetric al current waveform.(uns y mm etrical ratio is less tha n 10 %) please do not use the i n verter whi c h ha s un symmetri c al v o lt age a nd un symmetri c al current and spi k e wave. la mp frequ en cy may pro d u c e interf ace with ho rizont al syn c h r o nou s freq uen cy and a s a result this m a y cau s e be at on the displ a y . therefore lam p freque ncy shall be as a w ay possibl e from the hori z ont a l synch r o nou s frequ en cy an d from it s ha rmoni cs in o r d e r to preve n t interferen ce. req u irement s for a sy ste m inverter d e s ign, which is intended to h a ve a better d i splay pe rforman c e, a better po we r ef ficien cy and a more reliab l e lamp. it shall help in cre a se the la mp lifetime and redu ce it s leakage cu rre nt. a. the a s ymmet r y rate of the inverter wavef o rm shoul d b e 10% belo w ; b. the di stortion rate of the waveform shou ld be within ?? 2 10%; c. the ide a l sine wave fo rm shall b e sy mmetri c in po sitive and ne gative pola r ities. * as ymmetry rate: | i p ? i ?p | / i rm s * 100% * dis t ortion rate i p (or i ?p ) / i rm s i -p i p 10 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e 4. block diagram 4.1 tft lc d modul e la mp connec t or (jst -bhsr-02vs-1) vcc v l gnd i n p u t c o n n e c t o r ( s t a r c o n n 0 9 3 g 3 0 - b 0 0 0 1 a ) dc/ dc co n verter & refere nc e vol t a ge l v ds input / timing co n t rol l er ba c k lig h t unit s c a n d r i v e r i c da t a driver ic tft lcd p a nel (16 80x 3x1 05 0) rx o0(+ /-) rx o1(+ /-) rx o2(+ /-) rx o3(+ /-) rx oc(+ /-) rx e0(+ /-) rx e1(+ /-) rx e2(+ /-) rx e3(+ /-) rx ec(+ /-) sell v ds 4.2 backli g ht unit 1 hv(blu e) 2 l v (bla ck) 1 hv(pin k) 2 l v (white ) 1 hv(blu e) 1 hv(pin k) 2 l v (white ) 2 l v (bla ck) 1 1 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e 5. input t e rminal pin assignment 5.1 tft lc d modul e p i n n a m e de scriptio n 1 rxo0 - neg a tive l v ds dif f erential dat a inp u t. chann el o0 (o dd) 2 rxo0 + positive l v ds dif f erential dat a inp u t. chann el o0 (o dd) 3 rxo1 - neg a tive l v ds dif f erential dat a inp u t. chann el o1 (o dd) 4 rxo1 + positive l v ds dif f erential dat a inp u t. chann el o1 (o dd) 5 rxo2 - neg a tive l v ds dif f erential dat a inp u t. chann el o2 (o dd) 6 rxo2 + positive l v ds dif f erential dat a inp u t. chann el o2 (o dd) 7 g n d gro u n d 8 rxo c - neg a tive l v ds dif f erential clo ck in put. (odd ) 9 rxo c + positive l v ds dif f erential clo ck in put. (odd ) 10 rxo3 - neg a tive l v ds dif f erential dat a inp u t. chann el o3 (od d ) 1 1 rxo3 + positive l v ds dif f erential dat a inp u t. chann el o3 (o dd) 12 rxe0- neg a tive l v ds dif f erential dat a inp u t. chann el e0 (e ven) 13 rxe0+ positive l v ds dif f erential dat a inp u t. chann el e0 (e ven) 1 4 g n d gro u n d 15 rxe1- neg a tive l v ds dif f erential dat a inp u t. chann el e1 (e ven) 16 rxe1+ positive l v ds dif f erential dat a inp u t. chann el e1 (e ven) 1 7 g n d gro u n d 18 rxe2- neg a tive l v ds dif f erential dat a inp u t. chann el e2 (e ven) 19 rxe2+ positive l v ds dif f erential dat a inp u t. chann el e2 (e ven) 20 rxec- neg a tive l v ds dif f erential clo ck in put. (even) 21 rxec+ positive l v ds dif f erential clo ck in put. (even) 22 rxe3- neg a tive l v ds dif f erential dat a inp u t. chann el e3 (e ven) 23 rxe3+ positive l v ds dif f erential dat a inp u t. chann el e3 (e ven) 2 4 g n d gro u n d 25 test t e st pin sh oul d be tied to ground o r op en . 2 6 n c not co nne ctio n . 27 sell v ds sell v ds pin shoul d be tie d to grou nd o r ope n. 28 vcc +5.0v po we r sup p ly 29 vcc +5.0v po we r sup p ly 30 vcc +5.0v po we r sup p ly note (1) con necto r part no.: 093g30 -b 0001a (st a rco n n) or fi-xb30ssl-hf ( jae) o r equiv a lent . note (2) mating connec t or part no .:fi-x30h ; fi-x30c* ; fi-x30m* ; fi-x30hl ( -t),fi-x3 0 c * l(- t ) [jae] note (3) the firs t pixel is odd. note (4) input signal of eve n and od d clo ck sho u ld be the sam e timing. 12 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e sel l v d s = lo w or o p en l v ds outp u t d 7 d 6 d 4 d 3 d 2 d 1 d 0 l v d s ch a nne l e0 dat a o r d e r e g 0 e r 5 e r 4 e r 3 e r 2 e r 1 e r 0 l v ds outp u t d 1 8 d 1 5 d 1 4 d 1 3 d 1 2 d 9 d 8 l v d s ch a nne l e1 dat a o r d e r e b 1 e b 0 e g 5 e g 4 e g 3 e g 2 e g 1 l v ds outp u t d 2 6 d 2 5 d 2 4 d 2 2 d 2 1 d 2 0 d 1 9 l v d s ch a nne l e2 dat a o r d e r d e n a n a e b 5 e b 4 e b 3 e b 2 l v ds outp u t d 2 3 d 1 7 d 1 6 d1 1 d 1 0 d 5 d 2 7 l v d s ch a nne l e3 dat a order na eb7 eb6 eg7 eg6 er7 er6 l v ds outp u t d 7 d 6 d 4 d 3 d 2 d 1 d 0 l v d s ch a nne l o 0 dat a o r d e r o g 0 o r 5 o r 4 o r 3 o r 2 o r 1 o r 0 l v ds outp u t d 1 8 d 1 5 d 1 4 d 1 3 d 1 2 d 9 d 8 l v d s ch a nne l o 1 dat a o r d e r o b 1 o b 0 o g 5 o g 4 o g 3 o g 2 o g 1 l v ds outp u t d 2 6 d 2 5 d 2 4 d 2 2 d 2 1 d 2 0 d 1 9 l v d s ch a nne l o 2 dat a o r d e r d e n a n a o b 5 o b 4 o b 3 o b 2 l v ds outp u t d 2 3 d 1 7 d 1 6 d1 1 d 1 0 d 5 d 2 7 l v d s ch a nne l o 3 dat a o r d e r na ob7 ob6 og7 og6 or7 or6 13 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e 5.2 backli g ht unit pin symbol de scriptio n rem a rk 1 h v h i g h v o lt age p i n k 2 l v l o w v o lt age w h i t e 1 h v h i g h v o lt age b l u e 2 l v l o w v o lt age b l a c k note (1) connec tor part no.: j s t - b h sr-02vs - 1 or eq uivalent note (2) user ? s co nne ctor pa rt no.: jst - sm0 2 b-bhss-1 - tb (jst) o r equiv a lent 5.3 color da t a inp u t assignment the brightn e ss of each p r ima r y colo r (red, green a n d blue ) is ba sed on the 8-bi t gray scal e d a t a input for the colo r . th e highe r the bina ry input, the brighte r t he col o r . the t able belo w provid es the assign ment o f colo r versu s dat a inp u t. dat a sign al r e d g r e e n b l u e colo r r7 r 6 r 5 r 4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g 0 b 7 b 6 b 5 b 4 b3 b2 b1 b0 b a si c colo r s black red gre en blue cyan mage nt a y e llow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red r e d( 0) / d a rk r e d( 1) r e d( 2) : : r e d( 25 3 ) r e d( 25 4 ) r e d( 25 5 ) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of gre en gre en(0) / da rk gre en(1) gre en(2) : : gre en(253 ) gre en(254 ) gre en(255 ) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0 ) / dark blue(1 ) blue(2 ) : : blu e ( 25 3) blu e ( 25 4) blu e ( 25 5) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 note (1) 0: low level v o lt age, 1: hi gh level v o lt age 14 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e 6. interf ace timing 6.1 input signal timing spe cifica ti ons the inp u t sig nal timing sp ecification s are sho w n a s the followi ng t able an d timing diag ram . s i g n a l i t e m symbol m i n . t y p . m a x . u n i t n o t e freq uen c y f c 5 0 5 9 . 5 8 2 m h z - p e r i o d t c 1 3 . 4 1 6 . 8 - n s high t i me t c h - 4/7 - t c - l v ds cl oc k l o w t i m e t c l - 3 / 7 - t c - setup t i me tlvs 600 - - p s - lv d s d a t a hold t i me tlvh 600 - - p s - fram e rate fr 50 60 76 hz tv=tvd+tvb t o t a l t v 1 0 6 0 1 0 8 0 1 1 9 5 t h - d i s p l a y t v d 1 0 5 0 1 0 5 0 1 0 5 0 t h - v e r t ical ac tive d i splay t e rm b l a n k t v b tv-tvd 3 0 t v - t v d t h - t o t a l t h 8 9 0 9 2 0 1 0 0 0 t c th=t hd +th b d i s p l a y t h d 8 4 0 8 4 0 8 4 0 t c - ho rizont al a c tive display t e rm b l a n k t h b th-t hd 8 0 th-t h d t c - note ?g (1 ) beca use this modul e is o perated by de onl y mode, hsyn c a nd vsync i nput signal s shoul d be set to low logi c level or g r o und. othe rwi s e, this mo du le woul d ope rate abno rmall y . in pu t sign a l tim i ng d i ag ram 15 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e 6.2 power on/ o ff sequence t o prevent a latch-u p or dc operation of l cd module, the power on/of f sequ ence should follow the condition s shown in the following dia g ram. note. (1) the supply volt age of the external syst em for the m odul e in put should b e the sam e as the definition of vcc. (2) please apply the lamp volt age w i thin th e lcd operat ion range. when the backlight turns on before the lcd operation of the lcd turns of f, the display may , inst antly , function abno rmally . (3) in case of vcc = of f level, ple a se keep the level of input signals on the low or keep a high impedance. (4) t4 sh ould b e mea s ured af t e r the mod u le has be en full y disch arged betwe en po wer on/of f peri ods. (5) interface signal shall not be kept at hig h impedance w hen the po wer is on. 16 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e 7. optical chara cteristics 7.1 test conditi ons i t e m s y m b o l v a l u e u n i t ambient t e m perature t a 25 2 o c ambient hu m i dity ha 50 10 % rh supply v o lt ag e v cc 5 . 0 v input signal accordi ng to typical val ue i n "3. electrical cha racteristics" inverter current i l 7 . 0 m a inverter drivi ng fre que ncy f l 6 1 k h z inverter sumida h05 5307 7.2 optica l specifi c a t ions the relative mea s ureme n t method s of o p tical cha r a c te ri stics are shown in 7.2. the follo wing items shoul d be mea s u r ed unde r the test conditio n s d e scri bed in 7. 1 and st able enviro n ment sho w n in not e (6). i t e m s y m b o l con d i t i o n m i n . t y p . m a x . unit n o t e rx 0.649 red ry 0.336 gx 0.284 gre en gy 0.608 bx 0.152 blue by 0.078 wx 0.313 colo r chromatic i ty white wy x =0 , y =0 cs-1 000 t r=g=b = 2 55 gray scale t y p ? 0.03 0.329 ty p + 0.03 ( 1 ) , ( 5 ) cente r lumi n ance of white l c 2 5 0 3 0 0 - - - cd/m 2 (4), ( 5 ) cont ra st rati o cr 7 0 0 1 0 0 0 - - - - ( 2 ) , (6) t r - - - 1 . 3 2 . 2 m s re spo n s e t i me t f x =0 , y =0 - - - 3 . 7 5 . 8 m s (3) white v a riati on w x =0 , y =0 -- - 1 . 3 1 . 4 2 - ( 5 ) , ( 6 ) x + 75 8 5 - - - ho rizont al x - 75 85 -- - y + 70 80 -- - v i ewin g angl e ve r t i c a l y - cr >1 0 70 80 -- - deg. (1), ( 5 ) note (1) definition of v i ewin g angl e ( x, y) : 17 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e note (2) definition of cont ra st rati o (cr): the contra st ratio can be calcul ated by the followi ng e x pre ssi on. cont ra st rati o (cr) = l25 5 / l0 l255: lu mina nce of g r ay le vel 255 l 0: lumina n c e of gray level 0 cr = c r (7 ) cr (x) is corresp ondi ng to the cont ra st ratio of the p o int x at figure in note (6 ). note (3) definition of res p onse t i me (t r , t f ): 18 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e note (4) definition of l u mina nce of white (l c ): mea s ure the lumina nce of gray level 25 5 at cente r po int l c = l (7 ) l (x) is corre s pondi ng to the lumina nce of the point x at figure in note (6). note (5) mea s ureme n t setup: the lcd modul e sho u l d be st abili zed at giv en tempe r atu r e for 20 minute s to avoid abru p t temperature cha nge d u rin g measuri ng. in order to st abili ze the lumina nce, the mea s u r e m ent sho u ld be ex ecute d af ter li ghting ba ckli ght for 20 min u tes in a wi nd less ro om. gray 0 usb2000 light shie l d r oom ( a mb ien t l u m in an ce < 2 lu x ) center of the screen lcd pan e l lcd module 500 mm field of v i ew = 2o cs-1000t note (6) de finition of whi t e v a riation ( w): mea s ure the lumina nce of gray level 25 5 at 13 point s w = maximum [l (1) ~ l (13)] / minimum [l (1) ~ l (13)] 19 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e horizontal line ver t ica l line active area : t e st point x= 1 to 13 x 8. p ackaging 8.1 p a cki n g specifi ca ti ons (1) 5 l c d mo dule s / 1 box (2) box dime nsio ns: 59 5(l ) x 330 (w) x 440 (h) mm (3) w e ig ht: 16.5 kg (5 mo dule s pe r box ) 8.2 p a cki n g method (1) ca rton pa cki ng shoul d have no failu re in the following reli ability test items. t e s t item t e s t conditions note v i bration ist a st andard ran dom, fre quen cy ra ng e: 1 ? 200 hz t op & bottom: 30 minutes (+z), 10 mi n (-z), right & lef t: 10 minute s (x) back & forth 10 minute s (y) non o p e r atio n droppi ng t e st 1 angle, 3 ed ge, 6 face, 60cm non o p e r atio n 20 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e figur e . 8- 1 packi n g m e t h od for ocean sh ipping 21 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e figur e . 8-2 pack ing method for air trans port figur e . 8-3 pack ing method 22 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e 9. definition of la bels 9.1 cmo modul e label the ba rcode name p late is p a sted on e a c h mo dule a s illustrati o n , and it s definitio ns a r e a s followin g explan ation. (a) model name: m220z1 - l 0 3 (b) revis i on: rev . xx, for example: a0, a1? b1, b2? or c1, c2?et c . (c) cmo b a rcod e definition: s e r i a l i d : x x - x x - x - x x - y m d - l - n nnn cod e meani ng de scriptio n xx cmo inte rnal use - xx revisi on cove r all the cha nge x cmo inte rnal use - xx cmo inte rnal use - ymd y e a r , month, day y ear: 20 01 =1 , 2002=2, 20 03=3, 2004 =4? month: 1~12 =1, 2, 3, ~, 9, a, b, c day: 1~3 1 =1, 2, 3, ~, 9, a, b, c, ~, w , x, y , exclude i, o, and u. l produ ct line # line 1 = 1, lin e 2=2, lin e 3 = 3, ? nnnn serial nu mbe r manufa c turi n g seq uen ce o f produ ct (d) cu stome r ? s b a rcod e definit ion: s e r i a l i d : c m - 2 2 z 13 - x - x - x - x x - l - x x - l - y m d - n n n n cod e meani ng de scriptio n c m s u p p l i e r co de cmo = c m 22z1 3 m o d e l n u mbe r m220z 1-l03 =22 z 1 3 x rev i si on c o d e c1 =1, c2 =2, ?. x source d r iver ic code x gate driver ic c o de centu r y=1, cll = 2, de mos=3, ep son=4, fujit su=5, himax = 6, hit a chi = 7, hynix=8, ldi = 9, mat s u s hit a =a, ne c=b , novatec=c, oki=d, phili p s =e, re na sas=f , samsu ng=g , sanyo = h, sha r p = i, ti=j, t opro=k, t o shiba = l, windb ond =m x x c e l l lo cation t a inan, t a iwa n =t n l cell line # 1~1 2 =0~c xx modul e location t a inan, t a iwa n =t n; nin g b o chin a=cn l modul e line # 1~1 2 =0~c ymd y e a r , month, day y ear: 20 01 =1 , 2002=2, 20 03=3, 2004 =4? month: 1~12 =1, 2, 3, ~, 9, a, b, c day: 1~ 31=1, 2, 3, ~ , 9, a , b, c, ~ , t , u, v nnnn serial nu mbe r by lcd suppl ier 23 / 26 v e rsion 0.0
issu ed date: aug. 31, 2006 model no.: m220z 1-l03 te n t a t i v e 10. precautions 10.1 asse mbl y a nd handli n g precauti ons (1) do not ap ply rou gh force such a s be ndi ng or twi s ting to the modul e duri ng a s se mbly . (2) t o assemble or inst all mod u le into user ? s system can be only in clean working are a s. the d u st and oil may cau s e el ectri c al sho r t or worsen the polari z e r . (3) it? s not permitted to have pre s sure or impul se on the module be cau s e the lcd p a n e l and backlight will be damaged. (4) always follo w the corre ct powe r se que n c e wh en lcd modul e is con n e c ting a nd ope rating. this can preve n t dama ge to the cm os lsi chip s duri ng latch-u p . (5) do not pull th e i/f conne ct or in or o u t while the mod u l e is ope ratin g . (6) do not di sa ssemble the mo dule. (7) use a sof t dry cloth witho u t chemi c al s for clea ni ng, becau se the su rface of polari z er is very sof t and easily scratch ed. (8) it is dange ro u s that moi s ture com e into o r co nt a c ted th e lcd mo dul e, becau se m o istu re may d a mag e lcd mod u le whe n it is ope rating. (9) high temp erature o r hum idity may reduce the pe rf orma nce of modul e. please sto r e l c d modul e within the spe c ified sto r a g e conditio n s. (10 ) whe n ambie n t temperatu r e is lower than 10o c may redu ce the display qu ality . for example, the re spo n se time will be com e slo w ly , an d the st artin g volt age of ccf l will be high er th an roo m temperature. 10.2 safet y preca u tions (1) the st artup volt age of backlight is a pproximat ely 1000 v o lt s. it may cause electri c al sh ock whil e assem b ling with inverter . do not disa sse m ble the mo d u le or in se rt anything into the backlig ht unit. (2) if the liquid cryst a l mate ria l leaks from t he p a nel, it should b e ke p t away from the eyes o r m outh. in ca se of co nt a c t with han ds, skin o r cl oth e s, it has to b e wa she d away thorou ghly with soa p . (3) af ter the mod u le? s e nd of life, it is not harmful in ca se of normal o p e r ation a nd sto r ag e. 24 / 26 v e rsion 0.0

▲Up To Search▲

Price & Availability of M220Z1-L03

	To Download M220Z1-L03 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .